GATE Cut Off 2024: The GATE Cut off is the minimum score needed to qualify for M.Tech programs at IITs, NITs, IIITs, and other engineering institutes. IISc Bangalore has released the GATE Cut off 2024 along with the results on its official website: gate2024.iisc.ac.in. The GATE 2024 cutoff for CS is 27.6 for General category. The cutoff for CS is 24.8 for OBC-NCL category. The cutoff for CS is 18.4 for SC/ST category. The minimum qualifying cutoff marks for the other 29 papers will be updated soon. The GATE Cut off for IIT Bombay ranges from 325 to 750. The GATE Cut off for IIT Delhi ranges from 300 to 800. The GATE Cut off for IIT Madras ranges from 432 to 877. Candidates can check the category-wise GATE Cut off marks and ranks in the article below.
GATE cut off plays a pivotal role in understanding the GATE exam and how important it is to score to get admission to the desired institute. GATE cut off 2024 will help the candidates get an idea about the expected score and plan their studies accordingly. GATE cut off It is the minimum score needed to pass the GATE exam and is released as GATE marks out of 100 for each of the 29 papers, like Civil Engineering, Mechanical and Electrical Engineering, etc. Candidates whose marks exceed the set cut off qualify for the GATE exam. For example, the range of Cut off for IIT Bombay is 325 to 750, for IIT Madras, it is 432 to 877 and for IIT Delhi, it is 300 to 800.
GATE cut off 2024 helps the candidates understand measure their performance and set realistic goals. GATE Cut Off provides awareness of the minimum scores that a candidate requires for admission to M.Tech programs at IITs, NITs, and other institutes. Here are some presumed cut-offs for GATE Civil Engineering (CE):
It is to be noted that GATE cut-off trends may change each year. So, candidates aspirants need to stay updated with official announcements regarding GATE cut off. The expected GATE 2024 cut-off varies by discipline and category. Read the entire article to know the year-wise and category-wise cut-offs to get enlightened about the GATE 2024 cut off trends.
Candidates who are looking for GATE 2024 expected cut off should also check out the qualifying marks for each category. GATE Cut Off 2024 will help you understand how tough the exam is going to be and how you need to plan your studies to meet or surpass the GATE cut off. Check out the table below to know the GATE cut off 2024 based on the different categories of aspirants who participate and compete in the GATE exam.
| Paper Code | Test Paper | Cut-off (GEN) | Cut-off (OBC-NCL/EWS) | Cut-off (SC/ST/PwD) |
| CS | Computer Science and Information Technology | 27.6 | 24.8 | 18.4 |
| DA | Data Science and Artificial Intelligence | 37.1 | 33.3 | 24.7 |
| EC | Electronics and Communication Engineering | 25 | 22.5 | 16.6 |
| EE | Electrical Engineering | 25.7 | 23.1 | 17.1 |
| CE | Civil Engineering | 28.3 | 25.4 | 18.8 |
| ME | Mechanical Engineering | 28.6 | 25.7 | 19 |
| AE | Aerospace Engineering | 33.3 | 29.9 | 22.1 |
| AG | Agricultural Engineering | 25 | 22.5 | 16.6 |
| AR | Architecture and Planning | 41.5 | 37.3 | 27.6 |
| BM | Biomedical Engineering | 25 | 22.5 | 16.6 |
| BT | Biotechnology | 38.9 | 35 | 25.9 |
| CH | Chemical Engineering | 25 | 22.5 | 16.6 |
| CY | Chemistry | 25.2 | 22.6 | 16.7 |
| ES | Environmental Science and Engineering | 37.9 | 34.1 | 25.2 |
| EY | Ecology and Evolution | 35.8 | 32.2 | 23.8 |
| GE | Geomatics Engineering | 41.1 | 36.9 | 27.4 |
| GG1 | Geology and Geophysics (Geology) | 42 | 37.8 | 28 |
| GG2 | Geology and Geophysics (Geophysics) | 49 | 44.1 | 32.6 |
| IN | Instrumentation Engineering | 32.7 | 29.4 | 21.8 |
| MA | Mathematics | 25 | 22.5 | 16.6 |
| MN | Mining Engineering | 25 | 22.5 | 16.6 |
| MT | Metallurgical Engineering | 41 | 36.9 | 27.3 |
| NM | Naval Architecture and Marine Engineering | 25.1 | 22.5 | 16.7 |
| PE | Petroleum Engineering | 42.6 | 38.3 | 28.4 |
| PH | Physics | 32 | 28.8 | 21.3 |
| PI | Production and Industrial Engineering | 30.5 | 27.4 | 20.3 |
| ST | Statistics | 26.6 | 23.9 | 17.7 |
| TF | Textile Engineering and Fibre Science | 28.1 | 25.2 | 18.7 |
| XE | Engineering Sciences | 36.2 | 32.5 | 24.1 |
| XH-C1 | Humanities and Social Sciences (Economics) | 37 | 33.3 | 24.6 |
| XH-C2 | Humanities and Social Sciences (English) | 48 | 43.2 | 32 |
| XH-C3 | Humanities and Social Sciences (Linguistics) | 49.7 | 44.7 | 33.1 |
| XH-C4 | Humanities and Social Sciences (Philosophy) | 39.3 | 35.3 | 26.1 |
| XH-C5 | Humanities and Social Sciences (Psychology) | 52.7 | 47.4 | 35.1 |
| XH-C6 | Humanities and Social Sciences (Sociology) | 36 | 32.4 | 24 |
| XL | Life Sciences | 29.3 | 26.3 | 19.5 |
For GATE aspirants, along with GATE Cut Off 2024, GATE 2024 Marks vs Rank Analysis is an important medium to know their expected ranks based on their scores. This analysis concerns individual papers of the GATE 2024 exam. The table given below covers the Marks vs Rank analysis for GATE 2024 branches. These branches include Civil Engineering (CE), Mechanical Engineering (ME), Computer Science Engineering (CS) is another branch covered in the analysis. Electronics and Communication Engineering (EC) is also included together with Electrical Engineering (EE). Candidates can use this analysis to measure their expected ranks in GATE 2024 exam. Candidates should keep in mind that the below analysis is particular to the scores in these top GATE branches.
| Rank | Marks in GATE Exam | ||||
| ME | CS | CE | EC | EE | |
| 1-10 | 92+ | 80+ | 90+ | 73+ | 91+ |
| 10-50 | 87-92 | 75-80 | 85-90 | 67-73 | 87-91 |
| 50-100 | 85-87 | 72-75 | 78-85 | 63-67 | 84-87 |
| 100-200 | 82-85 | 68-72 | 74-78 | 60-63 | 81-84 |
| 200-500 | 79-82 | 62-68 | 70-74 | 56-60 | 77-81 |
| 500-1000 | 75-79 | 56-62 | 64-70 | 50-56 | 72-77 |
| 1000-2000 | 71-75 | 50-56 | 57-64 | 45-50 | 66-72 |
| 2000-5000 | 63-71 | 40-50 | 50-57 | 38-45 | 57-66 |
| 5000-10000 | 51-63 | 32-40 | 40-50 | 28-38 | 46-57 |
NOTE: Aspirants must remember that GATE Cut Off, GATE rank, and GATE score are three different things. They must not confuse GATE rank with GATE score. Let’s understand it in simple terms. A student with marks of around 67 and a GATE score of around 810 is expected to get a rank near 170 in Electronics and Communication Engineering. A candidate expecting a rank under 1000 has good chances of getting into a preferred branch in NITs. One more thing to keep in mind is that getting a good rank in GATE does not guarantee admission. Candidates must prepare seriously for the interview to move in the admission process. The preparation for Group Discussion (GD) is also important for the admission process. GATE rank is based on how well candidates perform in comparison to each other. GATE score indicates the actual marks obtained by a candidate. And thus, both rank and score are important for admission to preferred branches.
The GATE Cut Off marks may be different every year, but the rank of candidates required for the selection in a specific college or course remains almost the same. Why is it so, candidates may ask? This uniformity is because the number of seats for a particular course does not change regularly. In addition, the cut off marks may be different each year but the rank required for selection in a particular college and course is almost the same. This is because the seats for a particular course do not change regularly. They remain the same. Candidates are thus recommended to aim for an AIR rank of around 100 in GATE exam. Getting this rank will increase the chances of admission into IISc. A similar rank will also increase the chances of getting inside Top IITs. It also helps candidates to plan and prepare for GATE exam in a better way. It is to be noted that the changes in GATE Cut Off 2024 marks will not importantly impact rank requirements for top colleges. High AIR ranks are essential for securing admission to renowned engineering institutes. Therefore, targeting a top rank guarantees better options in desired courses and colleges.
| Name of the Institute(s) | Required GATE Rank |
| Indian Institute of Science, Bangalore Indian Institute of Technology, Bombay | (1) For Direct Admission: AIR < 100 (2) For some courses: ≤ AIR ≤ 600 |
| Indian Institute of Technology, Kanpur Indian Institute of Technology, Delhi Indian Institute of Technology, Madras | (1) For Direct Admission: AIR < 100 (2) For some courses: ≤ AIR ≤ 300 |
| Indian Institute of Technology, Kharagpur | AIR ≤ 600 |
| Indian Institute of Technology, Roorkee Indian Institute of Technology, Guwahati Indian Institute of Technology, BHU | AIR ≤ 1000 |
| National Institute of Technologies Indian Institute of Technology, Hyderabad Indian Institute of Technology, Patna, etc | AIR ≤ 1500 |
| Government Engineering Colleges (National & State level) | AIR ≤ 2500 |
| Private Engineering Colleges (National & State level) | AIR ≥ 2500 |
GATE Cut Off 2024 will play a pivotal role in the GATE 2024 exam. Candidates should also remember that GATE 2024 scores act as gateways to admissions to M. Tech programs at IITs, NITs and other GFTIs. Therefore, candidates should keep GATE Cut Off in mind. Here we will shed light on college-wise GATE Cut off for top M. Tech Colleges in India. Each IIT releases its own cut off separately after the completion of the admission process, whereas the cut offs for NITs and GFTIs are released separately through opening and closing ranks after each CCMT counselling round.
The qualifying GATE Cut off marks are those marks that the candidates are required to score to qualify the exam. GATE Cut Off 2024 will be out along with GATE 2024 results. Given below are the previous year GATE Cut off Marks for 2023-2012
| Paper Code | For General | For OBC/ EWS | For SC/ ST/ PwD |
| CS | 32.5 | 29.2 | 21.6 |
| ME | 28.4 | 25.5 | 18.9 |
| EC | 29.9 | 26.9 | 19.9 |
| EE | 25 | 22.5 | 16.6 |
| CE | 26.6 | 23.9 | 17.7 |
| Chemical Engineering | 32.1 | 28.8 | 21.4 |
| Instrumentation Engineering | 34.8 | 31.3 | 23.2 |
| Mathematics | 25 | 22.5 | 16.6 |
| Architecture and Planning | 33.7 | 30.3 | 22.4 |
| Biomedical Engineering | 25 | 22.5 | 16.6 |
| Aerospace Engineering | 25.1 | 22.5 | 16.7 |
| Agriculture Engineering | 25 | 22.5 | 16.6 |
| Biotechnology | 31.6 | 28.4 | 21 |
| Chemistry | 26.5 | 23.8 | 17.6 |
| Environmental Science & Engineering | 27.7 | 24.9 | 18.4 |
| Ecology Evolution | 42.6 | 38.3 | 28.4 |
| Geomatics Engineering | 28.7 | 25.8 | 19.1 |
| Geology | 36.7 | 33 | 24.4 |
| Geophysics | 47.7 | 42.9 | 31.8 |
| Mining Engineering | 25 | 22.5 | 16.6 |
| Metallurgical Engineering | 47.5 | 42.7 | 31.6 |
| Naval Architecture and Marine Engineering | 25 | 22.5 | 16.6 |
| Petroleum Engineering | 34.4 | 30.9 | 22.9 |
| Physics | 31.1 | 27.9 | 20.7 |
| Production & Industrial Engineering | 44.2 | 39.7 | 29.4 |
| Statistics | 25 | 22.5 | 16.6 |
| Textile Engineering & Fiber Science | 25.4 | 22.8 | 16.9 |
| Engineering Sciences | 37.9 | 34.1 | 25.2 |
| Economics (XH- C1) | 47.3 | 42.5 | 31.5 |
| English (XH- C2) | 52.4 | 47.1 | 34.9 |
| Linguistics (XH- C3) | 46.4 | 41.7 | 30.9 |
| Philosophy (XH- C4) | 38 | 34.2 | 25.3 |
| Psychology (XH- C5) | 54.9 | 49.4 | 36.6 |
| Sociology (XH- C6) | 50 | 45 | 33.3 |
| Life Sciences | 32.9 | 29.6 | 21.9 |
GATE Cut off 2023 Qualifying Scores (out of 1000): Take a look at the table below:
| Paper Code | For General | For OBC/ EWS | For SC/ ST/ PwD |
| CS | 350 | 313 | 227 |
| ME | 350 | 317 | 242 |
| EC | 350 | 313 | 226 |
| EE | 350 | 307 | 207 |
| CE | 350 | 318 | 244 |
| AE | 350 | 315 | 238 |
| AG | 350 | 278 | 107 |
| AR | 350 | 293 | 161 |
| BM | 350 | 290 | 149 |
| BT | 350 | 300 | 184 |
| CH | 350 | 311 | 224 |
| CY | 350 | 313 | 226 |
| ES | 350 | 304 | 197 |
| EY | 350 | 280 | 118 |
| GE | 350 | 295 | 167 |
| Geology (GG-1) | 350 | 300 | 184 |
| Geophysics (GG-2) | 350 | 220 | -81 |
| IN | 350 | 300 | 185 |
| MA | 350 | 292 | 154 |
| MN | 350 | 309 | 213 |
| MT | 350 | 272 | 90 |
| NM | 350 | 278 | 107 |
| PE | 350 | 297 | 175 |
| PH | 350 | 299 | 185 |
| PI | 350 | 289 | 148 |
| ST | 350 | 302 | 189 |
| TF | 350 | 306 | 205 |
| Engineering Sciences | 350 | 300 | 183 |
| Economics (XH- C1) | 350 | 253 | 27 |
| English (XH- C2) | 350 | 212 | -107 |
| Linguistics (XH- C3) | 350 | 265 | 70 |
| Philosophy (XH- C4) | 350 | 221 | -81 |
| Psychology (XH- C5) | 350 | 232 | -39 |
| Sociology (XH- C6) | 350 | 224 | -68 |
| XL | 350 | 290 | 150 |
GATE Cut off 2022 Qualifying Marks: Take a look at the table below to know the category-wise qualifying marks for the year 2022.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.6 |
| ME: Mechanical Engineering | 28.1 | 25.2 | 18.7 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.6 |
| EE: Electrical Engineering | 30.7 | 27.6 | 20.4 |
| CE: Civil Engineering | 30.4 | 27.3 | 20.2 |
| CH: Chemical Engineering | 25.3 | 22.7 | 16.8 |
| IN: Instrumentation Engineering | 42.4 | 38.1 | 28.2 |
| MA: Mathematics | 27.3 | 24.5 | 18.2 |
| AR: Architecture and Planning | 37.3 | 33.5 | 24.8 |
| BM: Biomedical Engineering | 25 | 22.5 | 16.6 |
| AE: Aerospace Engineering | 29.8 | 26.8 | 19.8 |
| AG: Agriculture Engineering | 26.3 | 23.6 | 17.5 |
| BT: Biotechnology | 35.5 | 31.9 | 23.6 |
| CY: Chemistry | 27.5 | 24.7 | 18.3 |
| ES: Environmental Science & Engineering | 25.9 | 23.3 | 17.2 |
| EY: Ecology Evolution | 33.4 | 30 | 22.2 |
| GE: Geomatics Engineering | 40.4 | 36.3 | 26.9 |
| GG: Geology | 48.7 | 43.8 | 32.4 |
| GG: Geophysics | 54.8 | 49.3 | 36.5 |
| MN: Mining Engineering | 25.5 | 22.9 | 17 |
| MT: Metallurgical Engineering | 46.2 | 41.5 | 30.8 |
| NM: Naval Architecture and Marine Engineering | 27.8 | 25 | 18.5 |
| PE: Petroleum Engineering | 37.8 | 34 | 25.1 |
| PH: Physics | 26.5 | 23.8 | 17.6 |
| PI: Production & Industrial Engineering | 43.7 | 39.3 | 29.1 |
| ST: Statistics | 25 | 22.5 | 16.6 |
| TF: Textile Engineering & Fiber Science | 38.8 | 34.9 | 25.8 |
| XE: Engineering Sciences | 40.3 | 36.2 | 26.8 |
| XH: Humanities and Social Sciences (C1- Economics) | 55.5 | 49.9 | 37 |
| XH: Humanities and Social Sciences (C2- English) | 51.9 | 46.7 | 34.5 |
| XH: Humanities and Social Sciences (C3- Linguistics) | 53.1 | 47.7 | 35.4 |
| XH: Humanities and Social Sciences (C4- Philosophy) | 50.7 | 45.6 | 33.8 |
| XH: Humanities and Social Sciences (C5- Psychology) | 62.1 | 55.8 | 41.4 |
| XH: Humanities and Social Sciences (C6- Sociology) | 59.7 | 53.7 | 39.8 |
| XL: Life Sciences | 33.9 | 30.5 | 22.5 |
GATE Cut off 2021: Check out the table below to know the category-wise qualifying marks for the year 2021.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 26.1 | 23.4 | 17.4 |
| ME: Mechanical Engineering | 33 | 29.7 | 22 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.6 |
| EE: Electrical Engineering | 30.3 | 27.2 | 20.2 |
| CE: Civil Engineering | 29.2 | 26.2 | 19.4 |
| CH: Chemical Engineering | 35.1 | 31.5 | 23.4 |
| IN: Instrumentation Engineering | 36 | 32.4 | 24 |
| MA: Mathematics | 29 | 26.1 | 19.3 |
| AR: Architecture and Planning | 40.9 | 36.8 | 27.2 |
| BM: Biomedical Engineering | 25 | 22.5 | 16.6 |
| AE: Aerospace Engineering | 26.3 | 23.6 | 17.5 |
| AG: Agriculture Engineering | 25 | 22.5 | 16.6 |
| BT: Biotechnology | 30 | 27 | 20 |
| CY: Chemistry | 36.2 | 32.5 | 24.1 |
| ES: Environmental Science & Engineering | 39.6 | 35.6 | 26.4 |
| EY: Ecology Evolution | 35.7 | 32.1 | 23.8 |
| GG: Geology | 38.9 | 35 | 25.9 |
| GG: Geophysics | 44.8 | 40.3 | 29.8 |
| MN: Mining Engineering | 31 | 27.9 | 20.6 |
| MT: Metallurgical Engineering | 48.5 | 43.6 | 32.3 |
| PE: Petroleum Engineering | 51.4 | 47.1 | 34.9 |
| PH: Physics | 32.8 | 29.5 | 21.8 |
| PI: Production & Industrial Engineering | 35.7 | 32.1 | 23.8 |
| ST: Statistics | 25 | 22.5 | 16.6 |
| TF: Textile Engineering & Fiber Science | 41.8 | 37.6 | 27.8 |
| XE: Engineering Sciences | 37 | 33.3 | 24.6 |
| XH: Humanities and Social Sciences (C1- Economics) | 29.4 | 26.4 | 19.5 |
| XH: Humanities and Social Sciences (C2- English) | 41.7 | 37.5 | 27.8 |
| XH: Humanities and Social Sciences (C3- Linguistics) | 35.3 | 31.7 | 23.5 |
| XH: Humanities and Social Sciences (C4- Philosophy) | 37.9 | 34.1 | 25.2 |
| XH: Humanities and Social Sciences (C5- Psychology) | 48.5 | 43.6 | 32.3 |
| XH: Humanities and Social Sciences (C6- Sociology) | 34.3 | 30.8 | 22.8 |
| XL: Life Sciences | 36 | 32.4 | 24 |
NOTE: *Normalized marks for multisession papers CE, CS and ME
GATE Cut off 2020: Check out the table below to know the category-wise qualifying marks for the year 2020.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 28.5 | 25.6 | 19 |
| ME: Mechanical Engineering | 34 | 30.6 | 22.6 |
| EC: Electronics and Communications Engineering | 28.8 | 25.9 | 19.2 |
| EE: Electrical Engineering | 33.4 | 30 | 22.2 |
| CE: Civil Engineering | 32.9 | 29.6 | 21.9 |
| CH: Chemical Engineering | 35.7 | 32.1 | 23.8 |
| IN: Instrumentation Engineering | 34.6 | 31.1 | 23 |
| MA: Mathematics | 25 | 22.5 | 16.6 |
| AR: Architecture and Planning | 34.8 | 31.3 | 23.2 |
| BM: Biomedical Engineering | 25 | 22.5 | 16.6 |
| AE: Aerospace Engineering | 27.2 | 24.4 | 18.1 |
| AG: Agriculture Engineering | 26.3 | 23.6 | 17.5 |
| BT: Biotechnology | 30.7 | 27.6 | 20.4 |
| CY: Chemistry | 26.7 | 24 | 17.8 |
| EY: Ecology Evolution | 42.2 | 37.9 | 28.1 |
| GG: Geology | 38.4 | 34.5 | 25.6 |
| GG: Geophysics | 51.9 | 46.7 | 34.6 |
| MN: Mining Engineering | 32.7 | 29.4 | 21.8 |
| MT: Metallurgical Engineering | 49.2 | 44.2 | 32.8 |
| PE: Petroleum Engineering | 39.8 | 35.8 | 26.5 |
| PH: Physics | 37.2 | 33.4 | 24.8 |
| PI: Production & Industrial Engineering | 36.6 | 32.9 | 24.4 |
| ST: Statistics | 25 | 22.5 | 16.6 |
| TF: Textile Engineering & Fiber Science | 37.1 | 33.3 | 24.7 |
| XE: Engineering Sciences | 26 | 23.4 | 17.3 |
| XL: Life Sciences | 31.7 | 28.5 | 21.1 |
GATE Cut off 2019: Check out the table below to know the category-wise qualifying marks for the year 2019.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 29.5 | 26.6 | 19.7 |
| ME: Mechanical Engineering | 34.1 | 30.7 | 22.7 |
| EC: Electronics and Communications Engineering | 26.7 | 24 | 17.8 |
| EE: Electrical Engineering | 39.6 | 35.6 | 26.4 |
| CE: Civil Engineering | 28.2 | 25.4 | 18.8 |
| CH: Chemical Engineering | 34.8 | 31.3 | 23.2 |
| IN: Instrumentation Engineering | 31.9 | 28.7 | 21.3 |
| MA: Mathematics | 25 | 22.5 | 16.7 |
| AR: Architecture and Planning | 41 | 36.9 | 27.3 |
| AE: Aerospace Engineering | 33.5 | 30.2 | 22.3 |
| AG: Agriculture Engineering | 28.3 | 25.5 | 18.9 |
| BT: Biotechnology | 35.9 | 32.3 | 23.9 |
| CY: Chemistry | 32 | 28.8 | 21.3 |
| EY: Ecology Evolution | 37.1 | 33.4 | 24.7 |
| GG: Geology and Geophysics | 44.5 | 40.1 | 29.7 |
| MN: Mining Engineering | 31.5 | 28.4 | 21 |
| MT: Metallurgical Engineering | 53.5 | 48.1 | 35.7 |
| PE: Petroleum Engineering | 49.9 | 44.9 | 33.3 |
| PH: Physics | 25.2 | 22.7 | 16.8 |
| PI: Production & Industrial Engineering | 32.2 | 29 | 21.5 |
| ST: Statistics | 32.5 | 29.2 | 21.7 |
| TF: Textile Engineering & Fiber Science | 40.1 | 36.1 | 26.7 |
| XE: Engineering Sciences | 26.7 | 24 | 17.8 |
| XL: Life Sciences | 36.7 | 33 | 24.5 |
GATE Cut off 2018: Check out the table below to know the category-wise qualifying marks for the year 2018.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.6 |
| ME: Mechanical Engineering | 34.7 | 31.2 | 23.1 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.6 |
| EE: Electrical Engineering | 29.1 | 26.1 | 19.4 |
| CE: Civil Engineering | 26.9 | 24.2 | 17.9 |
| CH: Chemical Engineering | 37.8 | 34 | 25.1 |
| IN: Instrumentation Engineering | 37.1 | 33.3 | 24.7 |
| MA: Mathematics | 29.4 | 26.4 | 19.5 |
| AR: Architecture and Planning | 43.9 | 39.5 | 29.2 |
| AE: Aerospace Engineering | 34.4 | 30.9 | 22.9 |
| AG: Agriculture Engineering | 25 | 22.5 | 16.6 |
| BT: Biotechnology | 27.9 | 25.1 | 18.5 |
| CY: Chemistry | 25.4 | 22.8 | 16.9 |
| EY: Ecology Evolution | 49.3 | 44.3 | 32.8 |
| GG: Geology and Geophysics | 32.4 | 29.1 | 21.5 |
| MN: Mining Engineering | 45 | 40.5 | 30 |
| MT: Metallurgical Engineering | 40.3 | 36.2 | 26.8 |
| PE: Petroleum Engineering | 39.8 | 35.8 | 26.5 |
| PH: Physics | 29 | 26.1 | 19.3 |
| PI: Production & Industrial Engineering | 32 | 28.8 | 21.3 |
| TF: Textile Engineering & Fiber Science | 32.2 | 28.9 | 21.4 |
| XE: Engineering Sciences | 31.5 | 28.3 | 21 |
| XL: Life Sciences | 29.9 | 26.9 | 19.9 |
GATE Cut off 2017: Check out the table below to know the category-wise qualifying marks for the year 2017.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.6 |
| ME: Mechanical Engineering | 32.7 | 29.4 | 21.8 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.6 |
| EE: Electrical Engineering | 25.2 | 22.6 | 16.7 |
| CE: Civil Engineering | 28.7 | 25.8 | 19.1 |
| CH: Chemical Engineering | 44.33 | 39.8 | 29.5 |
| IN: Instrumentation Engineering | 34.6 | 31.1 | 23 |
| BT: Biotechnology | 38.9 | 35 | 25.9 |
GATE Cut off 2016: Check out the table below to know the category-wise qualifying marks for the year 2016.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.67 |
| ME: Mechanical Engineering | 32.73 | 29.46 | 21.82 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.67 |
| EE: Electrical Engineering | 25 | 22.5 | 16.67 |
| CE: Civil Engineering | 25 | 22.5 | 16.67 |
| CH: Chemical Engineering | 27.52 | 24.77 | 18.34 |
| IN: Instrumentation Engineering | 25.45 | 22.9 | 16.96 |
| BT: Biotechnology | 26.08 | 23.47 | 17.39 |
GATE Cut off 2015: Check out the table below to know the category-wise qualifying marks for the year 2015.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.67 |
| ME: Mechanical Engineering | 25 | 22.5 | 16.67 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.67 |
| EE: Electrical Engineering | 25 | 22.5 | 16.67 |
| CE: Civil Engineering | 25.45 | 22.9 | 16.96 |
| CH: Chemical Engineering | 27.52 | 24.77 | 18.34 |
| IN: Instrumentation Engineering | 32.73 | 29.46 | 21.82 |
| BT: Biotechnology | 26.08 | 23.47 | 17.39 |
GATE Cut off 2014: Check out the table below to know the category-wise qualifying marks for the year 2014.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.67 |
| ME: Mechanical Engineering | 28.86 | 25.97 | 19.24 |
| EC: Electronics and Communications Engineering | 25.56 | 23.01 | 17.04 |
| EE: Electrical Engineering | 25 | 22.5 | 16.67 |
| CE: Civil Engineering | 26.57 | 23.91 | 17.71 |
| CH: Chemical Engineering | 35.14 | 31.62 | 23.43 |
| IN: Instrumentation Engineering | 25 | 22.5 | 16.67 |
| BT: Biotechnology | 25.84 | 23.26 | 17.23 |
GATE Cut off 2013: Check out the table below to know the category-wise qualifying marks for the year 2013.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 25 | 22.5 | 16.17 |
| ME: Mechanical Engineering | 25 | 22.5 | 16.17 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.17 |
| EE: Electrical Engineering | 25.74 | 23.17 | 17.16 |
| CE: Civil Engineering | 27.13 | 24.42 | 18.09 |
| CH: Chemical Engineering | 32.35 | 29.12 | 21.57 |
| IN: Instrumentation Engineering | 25 | 22.5 | 16.17 |
| BT: Biotechnology | 38.77 | 37.89 | 25.85 |
GATE Cut off 2012: Check out the table below to know the category-wise qualifying marks for the year 2012.
| Paper Code | For General | For OBC- (NCL)/ EWS | For SC/ ST/ PwD |
| CS: Computer Science and Information Technology | 31.54 | 28.39 | 21.03 |
| ME: Mechanical Engineering | 27.14 | 24.47 | 18.09 |
| EC: Electronics and Communications Engineering | 25 | 22.5 | 16.67 |
| EE: Electrical Engineering | 25 | 22.5 | 16.67 |
| CE: Civil Engineering | 33.03 | 29.73 | 22.02 |
| CH: Chemical Engineering | 29.38 | 26.44 | 19.59 |
| IN: Instrumentation Engineering | 25 | 22.5 | 16.67 |
Candidates should stay well-informed about the cut off to prepare accordingly. They can verify the GATE Cut Off 2024 by following the steps below:
There are multiple factors that determine the GATE Cut off. Given below are some of the main factors that decide the consideration for GATE 2024 Cut off:
GATE Cut Off 2024 is also related to the GATE Cut Off for PSUs, as the candidates who meet the GATE Cut Off by getting a good score in GATE exam can apply for various PSU Jobs (Public Sector Undertakings jobs). These PSUs shortlist the candidates, every year, based on the GATE score. The candidates who get shortlisted appear for the written examination and then go for personal interview rounds. Check out the previous years PSU GATE cut off from the table below:
| PSU Name | Discipline | GATE PSU Cut off- Category-wise | ||||
| – | – | UR | OBC | SC | ST | |
| BHEL | Mechanical | 79.31 | 75.18 | 61.33 | 53.84 | |
| Electrical | 69.98 | 66.04 | 53.99 | 50.59 | ||
| Electronics | 68.68 | 65.32 | 56.46 | 49.13 | ||
| Metallurgy | 65 | 57.67 | 56.67 | 48.67 | ||
| NTPC | Electrical | 66.69 | 61.11 | 50.93 | 49.28 | |
| Mechanical | 76.31 | 68.69 | 55.83 | 49.72 | ||
| Electronics | 63.74 | 55.85 | 47.47 | 47.1 | ||
| Instrumentation | 63.33 | 55 | 43 | 46.67 | ||
| Civil | 73.12 | 70.34 | 64.84 | 57.56 | ||
| IT | 65.93 | 55.76 | 50.71 | 37.71 | ||
| GAIL | Chemical | 68.4 | 64 | 60.75 | 53 | |
| Mechanical | 82.58 | 80.37 | – | 73.72 | ||
| Electrical | 77.95 | 74.54 | 66.24 | 61.82 | ||
| Instrumentation | 75.37 | 70.50 | – | 56.23 | ||
| Business Information System | 70.41 | 64.29 | 61.82 | – | ||
| Telecom/Telemetry | 76.22 | 70.39 | 66.34 | 58.73 | ||
| HPCL | Mechanical | 75.14 | 70.69 | 58.34 | 50.85 | |
| Civil | 66.97 | 62.26 | 54.91 | 54.26 | ||
| Electrical | 67.35 | 65.23 | 53.55 | 51.61 | ||
| Instrumentation | 61.33 | 57.33 | 44.67 | 35.33 | ||
| E &TC | 63.18 | 62.88 | 53.35 | 47.83 | ||
| Chemical | 54 | 51.67 | 44.33 | 41 | ||
| IOCL | Civil | 69.29 | 67.93 | 54.91 | 52.02 | |
| Mechanical | 71.82 | 71.11 | 57.67 | 48.74 | ||
| Electrical | 52.95 | 52.17 | 39.88 | 38.13 | ||
| Electronics | 61.65 | 59.92 | 47.74 | 44.84 | ||
| Instrumentation | 55.03 | 55.02 | 41.03 | 25.03 | ||
| CS and IT | 64.29 | 60.37 | 47.66 | 41.15 | ||
| PGCIL | Electrical | 68 | 63.67 | 51.33 | 25.57 | |
| Electronics | 50.67 | 47.67 | 39 | – | ||
| Civil | 78.54 | 73.92 | 65 | 64.74 | ||
| Related Blogs | |
| Gate 2024 Study Plan | GATE Notification 2025 |
| GATE 2024 Preparation Strategy for 6 Months | GATE 2025 Exam Date |
| Gate 2025 Eligibility Criteria |
The conducting body, IISc Bangalore, which is the conducting body of the GATE exam, decides the GATE Cut off.
All the participating IITs and NITs release their own cut off separately. Each IIT releases its own Cut off after COAP Counselling is concluded. GATE Cut off for NIT is released at the same time through Opening and Closing ranks after each round of CCMT Conselling.
Every PSU releases its own cut off separately for multiple engineering posts based on GATE exam. Candidates are required to qualify for the GATE PSU Cut off to be eligible for recruitment process.
GATE Cut off are decided based on many factors. These factors include the total number of applicants, the difficulty level of the GATE exam, and the number of seats available for admission in the related institute.
No. GATE Cut off for IITs is different for categories and institutes. In 2021, IIT Madras GATE Cut off for the CSE discipline was 816 for the general category, 723 for OBC, 596 for SC, 430 for ST, etc. Similarly, for IIT Kharagpur, GATE cut off 2021 for CSE was 776 for general, 731 for EWS, 682 for OBC, 550 for SC, etc.
The minimum GATE Cut off required for admission in IIT is different each year. All the participating IITs release separate cut off after the conclusion of GATE COAP. Candidates can check the previous year GATE Cut off for IITs to get an idea about the approximate scores they require to be eligible for admission to their desired college and course.
Yes. After qualifying GATE Cut off 2024, it is compulsory to participate in CCMT counselling to secure an admission at your desired NIT or GFTI. Each candidate need to qualify the cut off released after each round to CCMT counselling to be able to get admission in their desired M.Tech program.
GATE Cut off PDF includes category-wise cut off, paper code, highest scores secured by candidates in each paper, out of a maximum score of 1000, the qualifying percentage for each paper, and more.
In this blog, we have provided the UIIC AO Expected Cut Off 2024 after considering…
Here we are providing the SBI Clerk previous year's question paper, Candidates take the previous…
The SBI Clerk 2024 Notification has been released on their official website. Candidates can check…
SBI Clerk 2024 Notification pdf has been released by SBI with 14191 Vacancies of Junior…
In this blog, we have provided the UIIC AO Exam Analysis 2024 conducted on 21st…
In this blog, we have provided the SBI PO Selection Process 2024. Candidates must check…