SSC JE 2023: Building material and construction: What is Briquette apparatus?
Sign Up on PracticeMock for Free Tests, General Awareness, Current Affairs, Exam Notifications and Updates

What is the Briquette apparatus? How does it work? Do you know? If yes, how much do you know about it? In this article, we will reveal the mysteries of an optical square in a straightforward manner. You will acquire the skills to answer any question pertaining to the Briquette apparatus with finesse and accuracy. And do not miss the opportunity to take a Free Mock Test to assess your knowledge and abilities on this topic.

Take 1 FREE SSC JE Civil Engineering 2023 Mock Test And Learn How to Ace the Exam!

The briquette mould serves the purpose of casting cement briquettes used for testing tensile strength. It is a two-part split mould with thumb screws, specifically designed for brass manufacturing, allowing for easy and swift assembly and disassembly of the mould. The cast briquettes have a minimum cross-section of 25.4mm x 25.4mm and come with a steel base plate included.

Grab a Free SSC JE 2023 Mock Test & Check Your Knowledge on the Most Expected Topics!

Tensile Strength:

•  Mortar is prepared using standard sand, in ratio 1:3 (ennor sand).

• Water content =

•  Mortar is filled inside briquettes mould.

• Apply a downward force on this heap by beating with a spatula till water appears at the top. This is to ensure that the top surface is levelled.

• Perform the same process on the opposite side of the mold.

• Use the trowel blade to achieve a smooth surface finish.

• At least 12 specimens are prepared for testing, due to more uncertainty

• Place the molds in an environment with a temperature of 27 ± 2 °C and 90% humidity for a duration of 24 hours.

• After 24 hours, take out the briquettes from the molds and submerge them in clean water for curing until they are ready for testing.

Testing:

• Conduct tests on 6 briquettes after 3 days and an additional 6 after 7 days.

• Position the cement specimen between the anvils of the testing machine.

• Gradually apply the load on the specimen, starting from 0 and reaching 0.7 N/mm2 within 12 seconds.

• Record the load at which the cement specimen fails.

• Calculate the tensile strength by dividing the failure load by the surface area.

SSC JE 2023 Mock Test for Ultimate Practice

Day 1SSC JE SSC JE Civil Engineering 2023 Free Mock Test
Day 2SSC JE Civil Engineering 2023 Paper 1 Mock Test 1 Know your AIR & Analyze Your Performance
Day 3SSC JE Civil Engineering 2023 Paper 1 Mock Test 2
Day 4SSC JE Civil Engineering 2023 Paper 1 Mock Test 3
Day 5SSC JE Civil Engineering 2023 Paper 1 Mock Test 4
Day 6SSC JE Civil Engineering 2023 Paper 1 Mock Test 5
Day 7SSC JE Civil Engineering 2023 Paper 1 Mock Test 6
Day 8SSC JE Civil Engineering 2023 Paper 1 Mock Test 7
Day 9SSC JE Civil Engineering 2023 Paper 1 Mock Test 8
Day 10SSC JE Civil Engineering 2023 Paper 1 Mock Test 9
Day 11SSC JE Civil Engineering 2023 Paper 2 Mock Test 10
Day 12SSC JE Civil Engineering 2023 Paper 2 Mock Test 11
Day 13SSC JE Civil Engineering 2023 Paper 2 Mock Test 12
Day 14SSC JE Civil Engineering 2023 Paper 2 Mock Test 13
Day 15SSC JE Civil Engineering 2023 Paper 2 Mock Test 14

FREE SSC JE Civil Engineering 2023 Mock Test: Are You Ready for the Challenge? Find Out Now!

    Free Mock Tests for the Upcoming Exams



By Asad Yar Khan

I write and oversee the creation of informative educational blogs centering around study strategies, exam techniques, and more, to guide aspirants in clearing SSC, banking, engineering, and other competitive exams. I ensure a range of subjects are covered with precision and clarity. With over 7 years of diverse writing experience, I share a wealth of wisdom and expertise with thousands of students, through PracticeMock every day, helping them achieve their goals.

Leave a Reply

Your email address will not be published. Required fields are marked *